Errors and Solutions for Pallet stretchwrap Machine
What are the Common errors and Solutions for Pallet stretchwrap Machine:
Indicator light is not on
Power display: Turn on the power switch;
Indicator light is broken: Replace the indicator light;
The power supply cannot be plugged in: Plug in the power supply.
The turntable does not rotate or run
The power supply is not connected or the phase is missing: Check the power supply;
The motor is broken: Replace the motor;
The chain is broken or falls off: Reinstall the chain;
The control button is not good: Replace;
Adjust the inverter adjustment knob to the minimum position: Adjust to the appropriate frequency;
The emergency stop switch is in the stop position: Turn on the emergency stop switch.
The lifting body on the mast does not rise or fall
The limit switch is broken or the turntable counting switch is broken: Replace;
The power supply is not connected or the phase is missing: Check the power supply;
The motor is broken: Replace the motor;
The chain is broken or stuck: Replace;
The elevator slider or PLG is broken: Replace;
Adjust the inverter adjustment knob to the minimum position: Adjust to the appropriate frequency;
The emergency stop switch is in the stop position: Turn on the emergency stop switch.
The stretch film breaks too frequently
The stretch film is broken or of poor quality: Replace it;
The pre-stretch motor is not good: Replace the motor;
The micro switch is broken or the tension spring is fatigued: Replace it;
The pre-stretch chain falls off or the sprocket is loose: Reinstall the chain or tighten the sprocket;
The speed of the pre-stretch motor does not match the speed of the turntable motor: Adjust the speed matching between the two motors.
