Automatic pallet stretch wrap line application

Application of automatic pallet stretch wrapping machine in the factory:

     1. Case one: in a certain job site, the forklift driver places the goods on the fully automatic wrapping machine, starts the wrapping machine remotely, then goes to pick up other goods, and then returns to pick up the wrapped goods and send them to the storage area; After a while, the forklift forked another load of goods over •••••

      2. Case two: two fully automatic pallet stretch wrap machines are equipped on both sides of the palletizing robot. The robot is stacking goods to one of them, and the other has already been stacked. The stretch wrap machine has just finished the wrapping, and the forklift is picking up loads•••Palletizer, stretch wrap machine and forklift form a complete closed-loop system.

The automatic stretch wrap machine is evolved from the semi-automatic pallet stretch wrapper. The equipment has added the function of clamp and film cutter to realize the automatic wrapping of the goods. It does not need to manually cut the film, which reduces the number of operators and improves the work efficiency.

How does the fully automatic stretch wrap machine improve work efficiency?

Automatic film cutting: After the goods are packaged, the film is clamped with a scissor clamp and the film is mechanically cut. The advantage is that the structure is simple and convenient, and the stretch film is cut off at one time. The disadvantage is that the film tail is in a cut off state.

Automatic film clamping: After the goods are packaged, the film is clamped with a scissor clamp, then the film is cut off with a heating wire, a broom will sweep the film to the goods afterwards. The advantage is that the film tail is sticked to the goods and is handled very well. The disadvantage is that the film tail is affected by the site and the quality of the stretch film, and the retention time is limited.

Automatic film welding: (subdivided into contact type and non-contact type) after the goods are packaged, the film is clamped with a clamp, the film is cut off by a heating wire, and the film is bonded by a heating sheet. The advantage is that the film tail is bonded, which solves the problem of membrane shedding. The disadvantage is that the structure of the equipment is much more complex and requires frequent inspection and maintenance.

The fully automatic stretch wrap packaging machine has become more and more mature. It has strong functions and can have: three-color light work instructions, automatic switching modes, manual, remote control, signal modes, etc. It is believed that with the further development of technology, low energy consumption and intelligent automatic wrapping machines will come step by step.